maas setting up region-controller and cluster-controller

By | March 23, 2017

I attempted to set up a region-controller inside of MAAS recently. It was a disaster; I ended up breaking my whole environment. Luckly it was a demo environment, so I scratched it and started from square one again. This post is how I got it working, most of this is out of the internet, but this is a distilled version so you can just see what you need to do.

First thing first, on what you want your region-controller to be:

~$ sudo cat /var/lib/maas/secret

This’ll give you a 16 digit hex number that you need to copy for any cluster-controller that you want to connect to the region-controller.

After this, go to your cluster-controller and do the following:

~$ sudo dpkg-reconfigure maas-cluster-controller # point it to the MAAS instance that is your future region-controller
~$ sudo maas-provision install-shared-secret # it'll ask for the above secret you copy'd

If you’ve done everything correct you should see something like the following in the logs on the cluster-controller, then check your region-controller and it should be under “Clusters.”

~$ sudo cat /var/log/maas/pserv.log
2015-04-14 11:27:30-0500 [ClusterClient,client] Event-loop 'vm-controller-maas:pid=1318' authenticated.
2015-04-14 11:27:30-0500 [ClusterClient,client] Event-loop 'vm-controller-maas:pid=1317' authenticated.

I rebooted my cluster-controller to make sure everything came up as expected, and saw this error is /var/log/apache2/error.log.

~$ sudo cat /var/log/apache2/error.log
[Tue Apr 14 13:29:36.548078 2015] [:error] [pid 2766:tid 140219708958464] [remote] AssertionError: The secret stored in the database does not match the secret stored on the filesystem at /var/lib/maas/secret. Please investigate.

I resolved it by:

~$ sudo su - maas
~$ psql maasdb
maasdb => select * from maasserver_config;
 id |       name        |               value
  1 | rpc_shared_secret | "05e2NOT_REALLY_MY_SECRET03d412547"
(1 row)
maasdb=> begin transaction ;
maasdb=> update maasserver_config set value = '83f247fMY_NEW_VALUEcf00b2d1120aa' where id = 1;
maasdb=> end
maasdb-> ;
maasdb=> select * from maasserver_config ;
 id |       name        |              value
  1 | rpc_shared_secret | 83f247fMY_NEW_VALUEcf00b2d11280aa
(1 row)


Hopefully the installed-shared-secret will update the database in the future too, so you don’t have to hack it like this.


referral – >

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.