SSH jump hosts are employed as an alternative to SSH tunneling to access internal machines through a gateway.

The idea is to use ProxyCommand to automatically execute the ssh command on remote host to jump to the next host and forward all traffic through.

Contents

• 1Prerequisites
• 2Configuration
  • 2.1Single jump
  • 2.2Multiple jump
  • 2.3Static jump host list
• 3Usage
  • 3.1Single jump
  • 3.2Multiple jump
  • 3.3Dynamic jump host list
  • 3.4Tips
• 4See also
• 5External resources

Prerequisites

• SSH access to the gateway machine and the internal one.
• Gateway machine has Netcat installed.

Configuration

Single jump

ProxyJump hosts can be defined inside each user’s SSH config file.

FILE ~/.ssh/configProxyJump Example### First jump host. Directly reachable Host betajump HostName jumphost1.example.org ### Host to jump to via jumphost1.example.org Host behindbeta HostName behindbeta.example.org ProxyJump betajump

See the corresponding single jump section under Usage below.

Multiple jump

The same syntax can be used to make jumps over multiple machines:

FILE ~/.ssh/configAdd this text### First jump host. Directly reachable Host alphajump HostName jumphost1.example.org ### Second jumphost. Only reachable via jumphost1.example.org Host betajump HostName jumphost2.example.org ProxyJump alphajump ### Host only reachable via alphajump and betajump Host behindalphabeta HostName behindalphabeta.example.org ProxyJump betajump

See the corresponding multiple jump section under Usage below.

user $ssh behindalphabeta

Static jump host list

Static jump host list means, that the jump host(s) are known and can be defined before initiating the first ssh connection. Therefore a static jump host ‘routing’ can be defined in the user’s ~/.ssh/config file. The advantage in comparison to the dynamic jump host option is, that you don’t have to provide the .ssh config on jump hosts between your machine and all the other jump hosts between you and the final host you want to jump to.

Usage

Single jump

user $ssh behindalpha

If usernames on machines differ, specify them by modifying the correspondent ProxyJump line:

FILE ~/.ssh/configModify correspondent ProxyCommandProxyJump otheruser@behindalpha

It works with the scp command, too:

user $scp filename behindalphabeta:~/

 Note
The colon and path at the end is needed so that scp recognizes it as remote.

Multiple jump

The same syntax can be used to make jumps over multiple machines:

user $ssh -J user1@host1:port1,user2@host2:port2 user3@host3

Dynamic jump host list

The -J option can be used to jump through a host:

user $ssh -J host1 host2

If usernames or ports on machines differ, specify them:

user $ssh -J user1@host1:port1 user2@host2 -p port2

from -> https://wiki.gentoo.org/wiki/SSH_jump_host

Views: 12