sysctl.conf

  Uncategorized

Ubuntu server out of box is not optimized to make full use of available hardware. This means “out-of-box” setup might fail under high load.

So we need to tweak system configuration for maximum concurrancy.

Sysctl Tweaks

Open

vim /etc/sysctl.conf

Add following towards bottom

### IMPROVE SYSTEM MEMORY MANAGEMENT ###

# Increase size of file handles and inode cache
fs.file-max = 2097152

# Do less swapping
vm.swappiness = 10
vm.dirty_ratio = 60
vm.dirty_background_ratio = 2

### GENERAL NETWORK SECURITY OPTIONS ###

# Number of times SYNACKs for passive TCP connection.
net.ipv4.tcp_synack_retries = 2

# Allowed local port range
net.ipv4.ip_local_port_range = 2000 65535

# Protect Against TCP Time-Wait
net.ipv4.tcp_rfc1337 = 1

# Decrease the time default value for tcp_fin_timeout connection
net.ipv4.tcp_fin_timeout = 15

# Decrease the time default value for connections to keep alive
net.ipv4.tcp_keepalive_time = 300
net.ipv4.tcp_keepalive_probes = 5
net.ipv4.tcp_keepalive_intvl = 15

### TUNING NETWORK PERFORMANCE ###

# Default Socket Receive Buffer
net.core.rmem_default = 31457280

# Maximum Socket Receive Buffer
net.core.rmem_max = 12582912

# Default Socket Send Buffer
net.core.wmem_default = 31457280

# Maximum Socket Send Buffer
net.core.wmem_max = 12582912

# Increase number of incoming connections
net.core.somaxconn = 4096

# Increase number of incoming connections backlog
net.core.netdev_max_backlog = 65536

# Increase the maximum amount of option memory buffers
net.core.optmem_max = 25165824

# Increase the maximum total buffer-space allocatable
# This is measured in units of pages (4096 bytes)
net.ipv4.tcp_mem = 65536 131072 262144
net.ipv4.udp_mem = 65536 131072 262144

# Increase the read-buffer space allocatable
net.ipv4.tcp_rmem = 8192 87380 16777216
net.ipv4.udp_rmem_min = 16384

# Increase the write-buffer-space allocatable
net.ipv4.tcp_wmem = 8192 65536 16777216
net.ipv4.udp_wmem_min = 16384

# Increase the tcp-time-wait buckets pool size to prevent simple DOS attacks
net.ipv4.tcp_max_tw_buckets = 1440000
net.ipv4.tcp_tw_recycle = 1
net.ipv4.tcp_tw_reuse = 1

Load Changes

Run following command to load changes to sysctl.

sysctl -p

Useful Systcl Commands

Show all system parameters with their values (default or changed)

sysctl -A

Show values of parameters modified by you

sysctl -p

Show value for a single parameter  parameter-name

sysctl parameter-name

Change value for  a single parameter parameter-name without editing sysctl.confmanually.

sysctl -w parameter-name=parameter-value

Above command will overwrite any previous modifications to parameter-name. Also, you may need to surround parameter-value with quotes.

Credits

We do not have expertise to tweak linux at such level. So following links helped. They differ from most configs as they offered some explanation about parameters which helped us understand what we are picking and why!

  1. http://klaver.it/linux/sysctl.conf
  2. https://github.com/GoTux/Configs/blob/master/99-sysctl.conf

Views: 511

LEAVE A COMMENT

What is the capital of Egypt? ( Cairo )