• all drives connected, boot the UAC and create a RAID 0 off of the SSD and RAID 1 from both 3.5″ drives
• still in the UAC set the SSD RAID 0 as primary boot device
• shutdown and unplug the storage drives
• boot Ubuntu live CD (i used the iLO remote console) and follow the installation steps
• when asked for the partition to use, select whole partition
• continue until it asks for the GRUB location, by default it should install to sda, but in my case i had to specify sdb, which is the SSD, otherwise it would fail
• after GRUB is installed reboot
• in Ubuntu installation proceed to install the HPVSA driver, i’ll quote Royco on this part:Quotesudo add-apt-repository ppa:hp-iss-team/hp-storage sudo add-apt-repository ppa:hp-iss-team/hpvsa-update sudo apt-get update sudo apt-get install hpvsaNext blacklist AHCI:sudo nano /etc/modprobe.d/blacklist.conf add and save: blacklist = ahci sudo update-initramfs –u sudo reboot
• the last reboot might not be required, though i guess it doesn’t harm either
• shutdown and plug in the two storage drives
• next boot to Ubuntu, where you hopefully find two drives, of which the latter one is the RAID 1 AND the fans spin at 6% in idle

Views: 6